Weber Summit FT 400 LP Owners Manual - Page 12
Install match holder bracket, Assemble front top frame rail
View all Weber Summit FT 400 LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Step 5 Install match holder bracket You will need: one plastic button, match holder bracket and frame assembly. Align the match holder with the hole in the frame cross piece and insert the plastic button through the match holder bracket and frame.Figure 5. Uncoil match holder and chain and hang on bracket. View from underneath side of frame Step 6 Assemble front top frame rail You will need: one top frame rail #1, one top frame rail #2, one 1/4-20 x 1/2 inch bolt, frame assembly and 7/16 inch or adjustable wrench. Put top frame rail #1 to your right and top frame rail #2 to your left. Figure 6. Insert top frame rail #1 into top frame rail #2. Figure 6 (a). Insert the bolt. Figure 6 (b). Tighten bolt with a wrench. (If you try to insert a bolt and there are no holes, you have top frame rail #2 turned the wrong way. Turn top frame rail #2 around.) Note: Do not use a washer for this step. (a) (b) Figure 5 2 1 Figure 6 12