Weber Summit FT 400 LP Owners Manual - Page 19
Check burner alignment, Set LPfuel scale
![]() |
View all Weber Summit FT 400 LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Step 14 Check burner alignment Your Weber Gas Barbecue burner assembly has been factory assembled, pressure and flame tested. As a safety precaution we recommend you check the burner alignment. Figure 21. a) Are the mounting clips that hold the manifold and burner assembly in place? Figure 21 (a). b) Do the valves fit into the ends of the burners? Figure 21 (b). c) Is the end of each burner inserted into its locating slot? Figure 21 (c). (b) (a) (c) Step 15 Set LP fuel scale You will need: LP tank (empty). Note - For accuracy, the fuel scale must be set with an empty tank. We utilize various LP tank manufacturers. Some of the tanks we receive have differing top collar assemblies. (The top collar is the metal protective ring around the valve.) One series of tanks mounts with the valve facing front. The other tanks mount with the valve facing away from the fuel scale. These types of tanks are illustrated in Figure 22. Loosen the tank lock wing nut. Tighten so the lock is held up out of the way. Figure 22 (a). Lift and hook the tank onto the fuel scale. With an empty LP tank, adjust the fuel scale setting to E with scale setting (top) wing nut. Figure 22 (b). ƽCAUTION: Do not remove adjustment wing nut from tank scale. After adjusting tank scale, push tank down a couple of times to check that the tank scale is set on "E". Figure 21 Tank lock wing nut E F (a) (b) E F Scale setting wing nut Figure 22 19
![](/manual_guide/products/weber-summit-ft-400-lp-owners-manual-8560855/19.png)