Weider 2100 English Manual - Page 11
Weight Carriage 14 with an M10 Nylon Locknut
View all Weider 2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
20. Wrap the High Cable (45) around a 90mm Pulley 20 (38). Attach the Pulley inside the Top Frame (8) with an M10 x 70mm Bolt (58), two M10 Washers (26), two 13mm Spacers (34), and an M10 Nylon Locknut (71). 26 71 34 8 38 45 34 58 26 21. Attach the eyelet end of the High Cable (45) to 21 the M10 x 20mm Bolt (67) in the bracket on the Weight Carriage (14) with an M10 Nylon Locknut (71). 22. Locate the Low Cable (47). Route the Cable 22 through the cage and rest it in the brackets on the Center Base (2). Attach a 90mm Pulley (38) inside the indicated bracket on the Center Base (2) with an M10 x 47mm Bolt (61) and an M10 Nylon Locknut (71). 23. Attach a 90mm Pulley (38) inside the indicated 23 bracket on the Center Base (2) with an M10 x 47mm Bolt (61) and an M10 Nylon Locknut (71). 45 67 71 14 38 61 2 Cage 71 47 38 61 71 2 11