Weider 2100 English Manual - Page 12
Attach the Pulley inside the Front Upright 6
View all Weider 2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
24. Wrap the Low Cable (47) around a 90mm Pulley 24 (38). Attach the Pulley and a Cable Trap (44) to the second set of holes from the bottom of the two Pulley Plates (36) with an M10 x 47mm Bolt (61) and an M10 Nylon Locknut (71). Be sure the Cable Trap is turned to hold the Cable in the Groove of the Pulley. 71 44 47 36 61 38 25. Wrap the Low Cable (47) around a 90mm Pulley 25 (38). Attach the Pulley inside the indicated brack- et on the Front Base (1) with an M10 x 47mm Bolt (61) and an M10 Nylon Locknut (71). 38 47 71 1 61 26. Wrap the Low Cable (47) around a 90mm Pulley 26 (38). Attach the Pulley to the Double "U"-Bracket (37) with an M10 x 47mm Bolt (61) and an M10 Nylon Locknut (71). 37 71 61 38 47 27. Wrap the Low Cable (47) around a 90mm Pulley 27 (38). Attach the Pulley inside the Front Upright (6) with an M10 x 70mm Bolt (58), two M10 Washers (26), two 13mm Spacer (34), and an M10 Nylon Locknut (71). 12 71 26 34 38 47 26 34 6 58