Weider 244 Bench Uk Manual - Page 7

3. Lubricate an M10 x 55mm Bolt (42) with grease. 3 Attach the Frame (2) to the upper set of holes in the bracket on the Crossbar (3) with the Bolt and an 31 M10 Nylon Locknut (33). Do not overtighten the Locknut; the Frame must be able to pivot easily. 42 3 Tighten the Adjustment Knob (31) into the Crossbar (3) and the Frame (2). Lubricate 33 2 4. Tap a 30mm Square Inner Cap (22) into each end 4 of the Leg Lever (4). Tap a 25mm Round Inner Cap (24) into the indi- cated end of the weight tube on the Leg Lever (4). 22 Tap the 25mm Round Angled Cap (20) onto the other end of the weight tube. 4 20 24 5. Lubricate the M10 x 63mm Bolt (32) with grease. Attach the Leg Lever (4) to the bracket on the 5 Front Leg (8) with the Bolt and an M10 Nylon Locknut (33). Do not over tighten the Locknut; the Leg Lever must be able to pivot easily. Weight Tube 22 32 Lubricate 4 33 8 6. Tap two 19mm Round Inner Caps (9) into each 6 Long Pad Tube (10). Insert the Pad Tubes into the holes in the Leg Lever (4). Slide two Long Foam Pads (23) onto each Long Pad Tube. 23 4 9 10 9 23 7