Weider 950 English Manual - Page 12

23. Wrap the Low Cable (37) around a Pulley (39). 23 Attach the Pulley and a Cable Trap (41) to the lower set of holes in the "U"-Bracket (81) with an M10 x 48mm Bolt (77) and an M10 Nylon Locknut (56). 81 56 77 41 37 39 24. Wrap the Low Cable (37) around a Pulley (39). 24 Attach the Pulley inside the bracket on the Base (1) with an M10 x 45mm Bolt (68) and an M10 Nylon Locknut (56). 25. Wrap the Low Cable (37) around a Pulley (39). 25 Attach the Pulley and a Cable Trap (41) to the second set of holes from the bottom of the two Pulley Plates (14) with an M10 x 48mm Bolt (77) and an M10 Nylon Locknut (56). Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley. 26. Attach the Low Cable (37) inside the Base (1) 26 with an M10 x 65mm Bolt (79), two M10 Washers (55), two M10 x 23mm Spacers (83), and an M10 Nylon Locknut (56). 39 68 37 56 1 14 56 41 77 37 39 37 83 56 55 1 79 83 55 12