Weider 950 English Manual - Page 9

11. Wrap the High Cable (35) around a Pulley (39). Attach the Pulley inside the bracket on the Top Frame (5) with an M10 x 45mm Bolt (68) and an M10 Nylon Locknut (56). 11 56 5 68 35 39 12. Attach the end of the High Cable (35) to the M10 12 x 20mm Bolt (75) in the bracket on the Weight Carriage (26) with an M10 Nylon Locknut (56). 35 75 26 56 13. Locate the Arm Cable (36). Slide the Cable onto 13 the hook on the Right Arm (10). 36 Hook 10 14. Wrap the Arm Cable (36) around a "V"-Pulley 14 (38). Attach the Pulley and a Long Cable Trap (40) to a Pulley Bracket (30) with an M10 x 55mm Bolt (69) and an M10 Nylon Locknut (56). Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley. Attach the Pulley Bracket (30) to the bracket on the Front Upright (4) with an M10 x 78mm Bolt (71) and an M10 Nylon Locknut (56). 71 56 40 30 56 4 69 36 38 9