Weider 950 English Manual - Page 5

ASSEMBLY Make Things Easier for Yourself Everything in this manual is designed to ensure that the weight system can be assembled successfully by anyone. However, it is important to realize that the versatile weight system has many parts and that the assembly process will take time. Most people find that by setting aside plenty of time, assembly will go smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly requires two people. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the weight system, make sure all parts are oriented as shown in the drawings. • For help identifying small parts, use the PART IDENTIFICATION CHART. The following tools (not included) are required for assembly: • two adjustable wrenches • one rubber mallet • one standard screwdriver • one Phillips screwdriver • lubricant, such as grease or petroleum jelly, and soapy water. Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. FRAME ASSEMBLY 1 1. Before beginning assembly, be sure that you 50 have read and understand the information in the box above. 2 Press a 50mm Square Inner Cap (44) into the end of the Base (1). Press two 50mm Square 50 1 Outer Caps (50) onto the ends of the Stabilizer (2). Orient the Stabilizer (2) with the indents around the holes on the bottom. Insert two M8 x 67mm Carriage Bolts (66) into the bottom of the Stabilizer. Insert two M8 x 63mm Carriage Bolts (65) into the bottom of the Base (1). Indents 66 65 44 Slide the end of the Base (1) onto the M8 x 67mm Carriage Bolts (66) in the Stabilizer (2). 5