Weider Club C 725 English Manual - Page 15

the Nylon Locknut; the Spotter Hook must

Get Weider Club C 725 PDF manuals and user guides View all Weider Club C 725 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

21. Attach a Spotter Hook (115) to a Barbell Spotter 21 (109) with an M10 x 26mm Button Bolt (119) and an M10 Nylon Locknut (116). Do not overtighten the Nylon Locknut; the Spotter Hook must pivot easily. Next, slide a Barbell Spotter Bumper (111) and the Barbell Spotter (109) onto the left Barbell Guide (25). Engage the Spotter Hook (115) into an adjustment slot near the bottom of the left Front Upright (11). Next, identify the Left Barbell Carriage (110), which is marked with a sticker. Slide a Barbell Bumper (107) and the Left Barbell Carriage onto the left Barbell Guide (25). Repeat this step on the other side. Always position both Barbell Spotters (109) at the same height. 110 116 107 109 119 11 115 111 25 22. Set the Top Frame (17) on the Uprights (11, 12, 60) and the Barbell Guides (25). Attach the Top Frame (17) to the left Front Upright (11) with two M10 x 92mm Button Bolts (120), four M10 Washers (83), and two M10 Nylon Locknuts (116). Do not tighten the Nylon Locknuts yet. Attach the Top Frame (17) to the right Front Upright (11) in the same way. 22 11 25 17 60 116 83 83 11 12 83 120 83 120 25 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
15
22. Set the Top Frame (17) on the Uprights (11, 12,
60) and the Barbell Guides (25).
Attach the Top Frame (17) to the left Front
Upright (11) with two M10 x 92mm Button Bolts
(120), four M10 Washers (83), and two M10
Nylon Locknuts (116).
Do not tighten the Nylon
Locknuts yet.
Attach the Top Frame (17) to the right Front
Upright (11) in the same way.
83
83
83
83
116
120
120
17
11
60
12
25
11
22
25
21
115
109
119
116
111
25
107
11
110
21. Attach a Spotter Hook (115) to a Barbell Spotter
(109) with an M10 x 26mm Button Bolt (119) and
an M10 Nylon Locknut (116).
Do not overtighten
the Nylon Locknut; the Spotter Hook must
pivot easily.
Next, slide a Barbell Spotter Bumper (111) and
the Barbell Spotter (109) onto the left Barbell
Guide (25). Engage the Spotter Hook (115) into
an adjustment slot near the bottom of the left
Front Upright (11).
Next, identify the Left Barbell Carriage (110),
which is marked with a sticker. Slide a Barbell
Bumper (107) and the Left Barbell Carriage onto
the left Barbell Guide (25).
Repeat this step on the other side. Always
position both Barbell Spotters (109) at the
same height.