Weider Club C 725 English Manual - Page 9

5. Apply grease to an M10 x 175mm Bolt (42). 5 Attach the Backrest Frames (8) to the Bench Frame (1) with the Bolt, two M10 Washers (83), a 33mm Spacer (52), and an M10 Nylon Locknut Grease (116). Set the end of the Backrest Post (7) in one of the slots in the Bench Frame. Do not overtighten the Nylon Locknut; the Backrest Frames must pivot easily. 42 83 8 52 7 83 See step 4. Tighten the M10 Nylon Locknut 116 (116) and the four M6 x 40mm Screws (140). Do not overtighten the Nylon Locknut; the Backrest Post (7) must pivot easily. 1 6. Attach the Weight Tube (5) to the Leg Lever (4) 6 with an M8 x 60mm Button Bolt (95), two M8 Washers (84), a 12.5mm Spacer (138), and an M8 Nylon Locknut (139). Make sure that the Spacer is inside the Leg Lever. Next, press a 25mm Round Outer Cap (45) onto the indicated end of the Weight Tube (5). Then, slide the Olympic Adapter (46) onto the Weight Tube. Attach the Olympic Adapter with an M8 x 10mm Set Screw (49). 4 139 49 46 5 84 45 138 84 95 7. Apply grease to the barrel of an M10 x 70mm Bolt 7 Set (118). Attach the Leg Lever (4) to the Front Leg (3) with the Bolt Set. Make sure that the barrel of the Bolt Set is inserted through both sides of the bracket on the Front Leg. Grease 118 4 118 3 9