Weider Club C670 Bench English Manual - Page 17
Bolt 107, an M10 Small Washer 95, and an M8
View all Weider Club C670 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
34. Locate the Butterfly Cable (109). Attach the 34 Cable to the Left Butterfly Arm (57) with an M8 x 43mm Shoulder Bolt (107), an M10 Small Washer (95), and an M8 Nylon Locknut (108). 35. Wrap the Butterfly Cable (109) over a "V"-pulley 35 (86). Attach the "V"-pulley and a Large Cable Trap (111) to the bracket on the Center Upright (45) with an M10 x 60mm Bolt (105) and an M10 Nylon Locknut (34). Make sure the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 36. Wrap the Butterfly Cable (109) under a Pulley 36 (87). Attach the Pulley to the Double "U"-bracket (81) with an M10 x 45mm Bolt (33) and an M10 Nylon Locknut (34). 37. Wrap the Butterfly Cable (109) over a "V"-pulley 37 (86). Attach the "V"-pulley and a Large Cable Trap (111) to the other side of the bracket on the Center Upright (45) with an M10 x 60mm Bolt (105) and an M10 Nylon Locknut (34). Make sure the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 107 109 95 108 57 45 34 86 111 105 109 109 87 34 33 81 111 86 105 109 45 34 38. Attach the Butterfly Cable (109) to the Right 38 Butterfly Arm (56) with an M8 x 43mm Shoulder Bolt (107), an M10 Small Washer (95), and an M8 Nylon Locknut (108). 107 109 95 56 108 17