Weider Club C670 Bench English Manual - Page 7
Attach a Small Base Cap 20 to the Bench Base - press
View all Weider Club C670 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Attach a Small Base Cap (20) to the Bench Base 2 (3) with two M4 x 16mm Screws (36). Attach the 14 other Small Base Cap in the same manner. Press the 51mm x 76mm Inner Cap (14) into the indicated end of the Bench Leg (4). 4 Attach the Bench Leg (4) to the Bench Base (3) with four M10 x 71mm Bolts (31), two Bench Base Joint Plates (25), and four M10 Nylon Locknuts (34). Do not tighten the Locknuts yet. 20 34 25 3. Attach the Bench Leg (4) to the Bench Frame (1) with four M10 x 94mm Bolts (98), two Bench Joint Plates (24), and four M10 Nylon Locknuts (34). Tighten the M10 Nylon Locknuts (34) used in steps 1-3. 31 25 31 20 36 3 34 24 4 24 3 1 98 4. Press two 38mm x 50mm Inner Caps (15) into 4 the Backrest Frame (6). Attach the Backrest Bracket (16) to the Backrest Frame (6) with two M10 x 56mm Bolts (30), two M10 Washers (35), and two M10 Nylon Locknuts (34). 30 35 35 15 6 15 16 34 5. Attach the Seat Bracket (17) to the Seat Frame 5 (7) with two M10 x 56mm Bolts (30), two M10 Washers (35), and two M10 Nylon Locknuts (34). Do not tighten the Locknuts yet. 7 30 35 35 7 17 34 34