Weider E5100 B Owners Manual - Page 7

WEIDER HEALTH and FITNESS STEP 2 SEAT FRAME PART NAME OTY 65 5/16" X 2 1/2" CARRIAGE BOLT 2 70 5/16" FLAT WASHER 2 71 5/16" NYLON LOCK NUT 2 82 2" SQUARE PLASTIC CAP 1 Attach SEAT FRAME (5) to MAST BOTTOM SECTION (2) using 5/16" X 2 1/2" CARRIAGE BOLTS (65), 5/16" FLAT WASHERS (70), and 5/16" NYLON LOCK NUTS (71). Note that the carriage bolts must be inserted through the square holes of the flat plate of the Seat Frame first then through the Mast Bottom Section Press 2" SQUARE PLASTIC CAP (82) into end of SEAT FRAME (5). STEP 3 SEAT ASSEMBLY PART NAME OTY 52 1/4" X 2 3/4" MACHINE SCREW 1 53 1/4" X 3/4" MACHINE SCREW 2 65 5/16" X 21/2" CARRIAGE BOLT 2 70 5116" FLAT WASHER 2 71 5/16" NYLON LOCK NUT 2 Attach MOUNTING PLATE (6) to front hole of SEAT FRAME (5) using 5/16" X 2 1/2" CARRIAGE BOLT (65), 5/16" FLAT WASHER (70), and 5/16" NYLON LOCK NUT (71). This bolt should be left slightly loose to allow positioning when attaching seat. Position SEAT (9) onto SEAT FRAME (5) with single hole to the rear. Align bolt holes. u Attach SEAT BRACE •(7) to bottom of SEAT FRAME (5) using 1/4" X 2 3/4" MACHINE SCREW (52) going through and fastening into SEAT (9). Do not tighten this bolt. Align bolt holes of MOUNTING PLATE (6) with bolt holes on bottom of SEAT (9) and attach with 1/4" X 3/4" MACHINE SCREWS (53). u Tighten front 5/16" X 2 1/2" CARRIAGE BOLT (65) on SEAT FRAME (5). u Secure bottom of SEAT BRACE (7) to MAST •BOTTOM SECTION (2) using 5/16" X 2 1/2" • •CARRIAGE BOLT (65), -5/16" FLAT WASHER (70), and 5/16" NYLON LOCK NUT (71). This bolt must be inserted into square hole from the back of MAST BOTTOM SECTION (2) then through SEAT BRACE (7). Tighten all bolts left previously untightened. • PAGE 6 71 4 72 g7(0 S 71 70 65 5 0 5 82 65 6 gaI 65 53 7 70 71 C 52 70 71