Weider E5100 B Owners Manual - Page 8
Extension, Assembly, Backrest
View all Weider E5100 B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
WEIPER HEALTH and FITNESS STEP 4 LEG EXTENSION ASSEMBLY PART NAME OTY 54 5116"X23/4" HEX HEAD BOLT 1 70 5/16" FLAT WASHER 2 71 5/16" NYLON LOCK NUT 1 82 2" SQUARE PLASTIC CAP 1 83 314" ROUND PLASTIC CAP 4 0 Press 3/4" ROUND PLASTIC CAPS (83) into each end of both PAD BARS (31). Apply a small amount of liquid dish detergent onto each end of the Pad Bars to act as a lubricant. When the detergent dries it will also act as an adhesive. Assemble a SMALL FOAM PAD (11) onto one PAD BAR (31) and insert through large holes in leg cud brackets on SEAT FRAME (5). Assemble other SMALL FOAM PAD (11) onto opposite end of PAD BAR (31). Align LEG EXTENSION (10) in Leg Cud Brackets on SEAT FRAME (5) and secure with 5/16" X 2 3/4" HEX HEAD BOLT (54), 5/16" FLAT WASHERS (70), and 5/16" NYLON LOCK NUT (71). Assemble LARGE FOAM PAD (12) onto another PAD BAR (31) and insert through large holes in LEG EXTENSION (10) and assemble on another LARGE FOAM PAD (12). Press 2" SQUARE PLASTIC CAP (82) into top of LEG EXTENSION (10) STEP 5 BACKREST ASSEMBLY PART NAME 52 1/4" X 2 3/4" MACHINE SCREW 53 1/4" X 3/4" MACHINE SCREW 65 5/16" X 21/2' CARRIAGE BOLT 70 5/16" FLAT WASHER 71 6/16" NYLON LOCK NUT OTT 1 2 1 1 1 Attach MOUNTING PLATE (6) to top hole In MAST BOTTOM SECTION (2) using 5/16" X 2 1/2" CARRIAGE BOLT (65), 5/16" • FLAT WASHER (70), and 5/16" NYLON LOCK NUT (71). Do not tighten this bolt. O Align bolt holes of MOUNTING PLATE (6) with bolt holes of BACKREST (8) and secure with 1/4" S(3/4" MACHINE SCREWS (53). Align lower single hole of BACKREST (8) with hole in MAST BOTTOM SECTION (2) and secure with 1/4" X 2 3/4" MACHINE SCREW (52). Tighten all bolts. 12 83 PAGE 7 70 70 3 71 11 83 82 O 31 11 10 12 83 31 O.) 53 • 0 71 70 2 52