Weider Flex 225 Owners Manual - Page 5
Frame, Assembly
View all Weider Flex 225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
WEIDER HEALTH and FITNESS STEP 1 FRAME ASSEMBLY PAGE 4 PART NAME 32 RUBBER FEET 36 1/2" X 3" PLASTIC CAP 42 1 1/2" SQUARE PLASTIC CAP 43 212" SQUARE PLASTIC CAP 44 LEG CURL BUMPER 56 5/32' MACHINE SCREW 67 5/16" X 3" HEX HEAD BOLT 70 5/16" FLAT WASHER 71 5/16" NYLON LOCK NUT 78 5/8" LONG METAL SPACERS 86 5/16' X 21/4' HEX HEAD BOLT 88 5/16' X 2' HEX HEAD BOLT QTY u Cap MAIN FRAME (1) with 21/2" SQUARE PLASTIC CAP (43). 5 1 4 Assemble the MAIN FRAME (1) to the BASE "T" (2) by bolting up from the 1 bottom through the BASE PLATE (54) with 5/16" X 2 1/4" HEX HEAD BOLT 1 1 (86) and secure with 5/16" NYLON LOCK NUTS (71). Press on RUBBER FEET (32) to Base "T" ends. 2 4 Press RUBBER FEET (32) onto ends of FRONT FOOT (4) and assemble foot 6 to BACKBONE (3) with 5/16" X 2" HEX HEAD BOLTS (88) and 5/16 NYLON 2 LOCK NUTS (71). (Assemble foot so embossed bolt holes are to the floor.) 2 2 0 43 u Attach Backbone Assembly to MAIN FRAME (1) with 5/16" x 3" HEX HEAD BOLTS (67) and 5/16" FLAT WASHERS on one side and 5/8" LONG METAL SPACERS (78), 5/16" FLAT WASHERS (70), and 5/16" NYLON LOCK NUTS (71) on the opposite side. 0 1 80 42 67 42 70 78 70 71 36 71 86 2 54 32 88 u Cap front of backbone leg with 1/2" X 3" PLASTIC CAP (36) and ends of backbone tubes with 11/2" SQUARE PLASTIC CAPS (42). u Press 1 1/2" SQUARE PLASTIC CAPS (42) into ends of pec-deck band cross tube. u Attach LEG CURL BUMPER (44) to front vertical tube of BACKBONE (3) using 5/32" MACHINE SCREW (56). u Remove backing sheet from "FLEX" MAST DECAL (80) and adhere it to front of mast tube about 1/2" below cut out.