Weider Flex Ctx 60 English Manual - Page 11

20. Wrap the Long Cable (80) around a 90mm Pulley (28). Attach the Pulley and a Cable Trap (29) to the Top Frame (9) with the M10 x 112mm Bolt (69) and an M10 Nylon Locknut (76). Do not tighten the Locknut yet; another Pulley will be attached to it in step 22. 20 28 29 69 80 76 9 21. Wrap the Long Cable (80) around a 90mm Pulley 21 (28) in the direction shown. Attach the Pulley to the Weight Carriage (18) with an M10 Nylon Locknut (76). 80 76 18 28 22. Remove the M10 Nylon Locknut (76) used in step 22 20. Wrap the Long Cable (80) around a 90mm Pulley (28). Attach the Pulley and a Cable Trap (29) to the M10 x 112mm Bolt (69) with the M10 Nylon Locknut (76). 29 28 76 69 80 23. Wrap the Long Cable (80) around a 90mm Pulley 23 (28). Attach the Pulley and a Cable Trap (29) to the Upright Base (3) with an M10 x 132mm Bolt (72) and an M10 Nylon Locknut (76). 11 28 80 29 3 76 72