Weider Flex Ctx 60 English Manual - Page 13
the Front Leg 6 and the Leg Lever 7. Press - exercises
View all Weider Flex Ctx 60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
28. Slide the four Foam Pads (26) onto the tubes on 28 the Front Leg (6) and the Leg Lever (7). Press the four 19mm Round Inner Caps (78) into the ends of the tubes. 26 78 6 26 78 78 26 78 26 7 29. Attach the "FLEX CTX 60" exercise decal to the 29 Upright Base (3) and the Upright (4). The decal 9 should be centered on the Upright Base and Upright, and the top of the decal should be six inches below the Top Frame (9). Be careful 6" 4 not to wrinkle the decal. 3 30. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on the following page. Before using the weight system, pull the long cable a few times to be sure that it move smoothly over the pulleys. If the cable does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAM on page 17 for proper cable routing. 13