Weider Platinum Plus 1000 English Manual - Page 13
M8 Nylon Jamnut 139 and an M8 x 102mm Bolt - parts
View all Weider Platinum Plus 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
20. Pull out the Seat Knob (138) as far as it will go, and set the Seat Carriage (16) on the Bench Rail (5). 20 119 Loosely attach two 8mm Spacers (123), a 59mm 139 Spacer (122), and two Seat Wheels (74) to the bottom holes in the Seat Carriage (16) with an M8 Nylon Jamnut (139) and an M8 x 102mm Bolt (119). Make sure the parts are oriented as 16 138 shown in the inset drawing. 5 21. Make sure that the wide sides of all six Seat Wheels (74) are pressed against the Rail (5). While a second person presses down on the Seat (25), hold the bottom Seat Wheels firmly against the bottom of the Rail and properly tighten the indicated M8 Nylon Jamnut (139). Engage the Seat Knob (138) into an adjustment hole in the Rail (5). 21 25 22. Attach the Leg Lever (13) to the Front Leg (4) with a Leg Lever Pin (91) and a Cotter Pin (90). 22 123 74 122 74 Wide Side 123 74 74 5 74 74 139 138 90 91 13 4 13