Weider Pro 350 L Bench English Manual - Page 6

ASSEMBLY • To hire an authorized service technician to assemble the weight bench in your home, call 1-800-445-2480. • Assembly requires two persons. • Because of its size and weight, assemble the weight bench in the location where it will be used. Make sure that there is enough clearance to walk around the weight bench as you assemble it. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you complete all assembly steps. • To identify small parts, see page 5. • The following tools (not included) may be required for assembly: two adjustable wrenches one standard screwdriver one Phillips screwdriver Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. 1. To make assembly easier, read the 1 assembly tips in the box above before you begin. Orient the Crossbar (5) and an Upright (1) as shown. Attach the Crossbar (5) to the Upright (1) with two M10 x 100mm Bolts (39) and two M10 Locknuts (38). Do not tighten the Locknuts yet. Attach the Crossbar (5) to the other Upright (1) in the same way. 1 5 38 1 38 39 2. Orient the Front Leg (10) and the Main Frame (7) as shown. 2 35 7 Attach the Front Leg (10) to the Main Frame (7) with three M8 x 60mm Bolts (35), six M8 Washers (30), and three M8 Locknuts (32). Do not tighten the Locknuts yet. 32 30 30 32 35 10 6