Weider Pro 3770 English Manual - Page 13

27. Wrap the Ab Cable (47) around a 3 1/2" Pulley (24). 27 Insert the Ab Cable down through the Press Top Frame (9). Attach a 3/8" Flat Washer (48) and a 5/8" x 3/4" Bushing (66) to a 3/8" x 3 1/4" Bolt (62). Slide the Bolt through the Press Top Frame and the 24 62 3 1/2" Pulley. Secure another 5/8" x 3/4" Bushing and 3/8" Flat Washer to the Bolt with a 3/8" Nylon 48 Locknut (50). 47 66 48 50 9 28. Remove the preassembled 3/8" x 2" Bolts (54) from 28 the other Adjustable Pulley Plates (23). Wrap the Ab Cable (47) around a 3 1/2" Pulley (24). Attach the 3 1/2" Pulley and a Cable Trap (25) between the top holes in the Adjustable Pulley Plates (23) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). Be sure that the Cable Trap is turned to hold the Cable in place. 47 25 54 24 23 50 29. Wrap the Ab Cable (47) around a 3 1/2" Pulley (24). 29 Attach the 3 1/2" Pulley to the rear bracket on the Press Top Frame (9) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). Be sure the Ab Cable is routed in the direction shown. Bracket 9 54 24 Wrap the Ab Pulley (47) around another 3 1/2" Pulley (24). Attach the 3 1/2" Pulley to the forward bracket on the Press Top Frame (9) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). 54 24 82 50 47 30. Wrap the Ab Cable (47) around a 3 1/2" Pulley (24) 30 and slide the Ab Cable through the hole in the Press Upright (2). Attach a 3/8" Flat Washer (48) and a 5/8" x 3/4" Bushing (66) to a 3/8" x 3 1/4" Bolt (62). Slide the Bolt through the Press Upright and the 3 1/2" Pulley. Secure another 5/8" x 3/4" Bushing and 3/8" Flat Washer to the Bolt with a 3/8" Nylon Locknut (50). 2 62 48 47 66 24 66 48 50 13