Weider Pro 3770 English Manual - Page 15

35. Wrap the Weight Cable (72) around a 3 1/2" Pulley 35 (24). Attach the 3 1/2" Pulley and a Cable Trap (25) 1 to the Butterfly Upright (1) with a 3/8" x 4" Bolt (59), a 3/8" Flat Washer (48), and a 3/8" Nylon Jamnut (63). Be sure that the Cable Trap is turned to hold the Cable in place. 63 48 59 24 25 72 36. Wrap the Weight Cable (72) around a 3 1/2" Pulley 36 (24). Attach the 3 1/2" Pulley and a Cable Trap (25) between the lowest holes of the Adjustable Pulley Plates (23) hanging from the Butterfly Cable (73) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50) that was removed in step 23. Be sure that the Cable Trap is turned to hold the Cable in place. 73 54 25 24 72 23 50 37. Wrap the Weight Cable (72) around a 3 1/2" Pulley 37 (24). Attach the 3 1/2" Pulley and a Cable Trap (25) to the bracket on the Butterfly Base (4) with a 3/8" x 1 3/4" Bolt (57) and a 3/8" Nylon Jamnut (63). Be sure that the Cable Trap is turned to hold the Cable in place. 24 25 57 38. Note: For convenience, the weights assembled 38 in step 9 are not shown in the following draw- ings. Wrap the Weight Cable (72) around a 3 1/2" Pulley (24). Attach the 3 1/2" Pulley and a Cable Trap (25) to the bracket on the Butterfly Base (4) with a 3/8" x 1 3/4" Bolt (57) and a 3/8" Nylon Jamnut (63). Be sure that the Cable Trap is turned to hold the Cable in place. 72 63 Bracket 4 72 25 63 57 24 Bracket 4 15