Weider Pro 3770 English Manual - Page 9

Arm Assembly - weight

Get Weider Pro 3770 PDF manuals and user guides View all Weider Pro 3770 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

12. Secure the Press Top Frame (9) to the Butterfly Top 12 Frame (33) with two 3/8" x 3 1/4" Bolts (62), two 3/8" Flat Washers (48), and two 3/8" Nylon Locknuts (50). Do not tighten the Nylon Locknuts 50 48 62 yet. 9 48 33 13. Secure the Weight Guides (15) to the Press Top Frame (9) with two 3/8" x 1 3/4" Bolts (57) and two 13 3/8" Nylon Locknuts (50). Tighten the Nylon Locknuts (50) used in steps 2-13. 57 9 50 50 15 ARM ASSEMBLY 14 14. Locate and open the parts bag labeled "ARM ASSEMBLY." Press a 1 1/2" Square Inner Cap (35) into the Right Pivot Arm (85). Lubricate the axles on the Butterfly Top Frame (33). Secure the Right Pivot Arm (85) to the right axle with two Retainer Rings (31) and a 1" Round Outer 31 Cap (38). Do not confuse the Right Pivot Arm with the Left Pivot Arm (not shown). The Retainer Rings may break if disassembled. Note: Be sure the Retainer Rings (31) and 1" Round Outer Cap (38) are oriented as shown in the inset drawing. Repeat this step with the Left Pivot Arm (not shown) and left axle. 9 35 Axle 38 33 Lubricate 85 31 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
9
48
62
50
48
33
9
12. Secure the Press Top Frame (9) to the Butterfly Top
Frame (33) with two 3/8” x 3 1/4” Bolts (62), two
3/8” Flat Washers (48), and two 3/8” Nylon
Locknuts (50).
Do not tighten the Nylon Locknuts
yet.
13. Secure the Weight Guides (15) to the Press Top
Frame (9) with two 3/8” x 1 3/4” Bolts (57) and two
3/8” Nylon Locknuts (50).
Tighten the Nylon Locknuts (50) used in steps
2–13.
12
13
57
9
50
50
15
14
85
35
Lubricate
31
33
38
Axle
31
38
14.
Locate and open the parts bag labeled “ARM
ASSEMBLY.”
Press a 1 1/2” Square Inner Cap (35) into the Right
Pivot Arm (85).
Lubricate the axles on the Butterfly Top Frame (33).
Secure the Right Pivot Arm (85) to the right axle
with two Retainer Rings (31) and a 1” Round Outer
Cap (38).
Do not confuse the Right Pivot Arm
with the Left Pivot Arm (not shown). The
Retainer Rings may break if disassembled.
Note: Be sure the Retainer Rings (31) and 1”
Round Outer Cap (38) are oriented as shown in
the inset drawing.
Repeat this step with the Left Pivot Arm (not
shown) and left axle.
ARM ASSEMBLY