Weider Pro 3770 English Manual - Page 16

39. Wrap the Weight Cable (72) around a 3 1/2" Pulley 39 (24). Attach the 3 1/2" Pulley and a Cable Trap (25) between the lowest holes in the Adjustable Pulley Plates (23) hanging from the Ab Cable (47) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50) that was removed in step 28. Be sure that the Cable Trap is turned to hold the Cable in place. 54 25 47 23 50 24 72 40. Remove the preassembled 3/8" x 1 3/4" Bolts (57) 40 from the Small Pulley Plates (22). Wrap the Weight Cable (72) around a 3 1/2" Pulley (24). Attach the 3 1/2" Pulley between two Small Pulley Plates (22) with a 3/8" x 1 3/4" Bolt (57) and a 3/8" Nylon Locknut (50). 24 50 72 57 22 41. Wrap the Weight Cable (72) around a 4 1/2" Pulley 41 (82). Attach the 4 1/2" Pulley to the bracket on the Press Top Frame (9) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). 54 82 9 72 50 Bracket 42. Place a 1/2" Flat Washer (11) on top of the Weight 42 Tube (17). Thread a 1/2" Plain Nut (45) halfway onto the bolt 72 on the Weight Cable (72). Screw the bolt on the Weight Cable into the Weight Tube (17) a couple of 45 turns. 11 Tighten the 1/2" Plain Nut (45) down onto the 1/2" 17 Flat Washer (11). 16