Weider Pro 395 B Bench English Manual - Page 6

ASSEMBLY • Assembly requires two persons. • Because of its weight and size, assemble the weight bench in the location where it will be used. Make sure that there is enough clearance to walk around the weight bench as you assemble it. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • To identify small parts, see page 5. • In addition to the included tool(s), assembly requires the following tools: two adjustable wrenches Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.weiderservice.com/registration on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Care • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call 1-877-992-5999 and register your product. 2. Identify the Left Brace (26). Attach the Left Brace (26) to one of the Uprights (24) with two M10 x 77mm Carriage Bolts (53), a Support Plate (13), and two M10 Locknuts (44); do not tighten the Locknuts yet. Repeat this step to attach the Right Brace (60) to the other Upright (24). 2 24 60 24 53 26 53 44 13 6