Weider Pro 408 English Manual - Page 9
Lubricate an M10 x 72mm Bolt 27. Attach the Leg - weight set
View all Weider Pro 408 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
10. Lubricate an M10 x 72mm Bolt (27). Attach the Leg 10 Lever (3) to the Front Leg (2) with the Bolt and an M10 Nylon Locknut (37). 37 3 2 27 Lubricate 11. Attach one end of the Seat (14) to the Bench Frame (1) with the M6 x 65mm Screw (32) and an M6 Washer (39). Attach the other end of the Seat (14) with two M6 x 16mm Screws (33). 11 14 33 1 12. Press 19mm Round Caps (23) into the ends of each of the three Pad Tubes (17). Insert a Pad Tube (17) through each of the holes in the Leg Lever (3). Insert the remaining Pad Tube through one of the three sets of holes in the bracket on the Front Leg (2). Slide two Foam Pads (18) onto each Pad Tube (17). 12 18 23 33 32 39 17 23 3 18 2 13. Attach the Curl Pad (15) to the Curl Post (10) with 13 two M6 x 16mm Screws (33). Make sure all parts are properly tightened before you use the weight bench. The use of all remain- ing parts will be explained in Adjusting the Weight 15 Bench beginning on the next page. 33 10 9