Weider Pro 4300 User Manual - Page 13

13. Apply grease to the locations shown and attach the Left Butterfly Bracket (28) to the Butterfly 13 Frame (5) with an M10 x 80mm Bolt (84) and an M10 Locknut (77). 84 Repeat this step for the Right Butterfly Bracket (29). Grease See steps 2-13. Tighten the Locknuts (77, 78, 107). 29 5 77 28 14. Attach a Butterfly Handle (27) to the Left Butterfly 14 Arm (25) with an M10 x 65mm Button Bolt (106), two M10 Washers (80), two 13mm Steel Spacers (109), and an M10 Locknut (77). Secure the Left Butterfly Arm (25) with an M10 x 82mm Button Screw (92) and an M10 Large Washer (105). Repeat this step for the Right Butterfly Arm and Butterfly Handle (26, 27). 27 26 25 77 80 109 80 106 109 27 15. Apply grease in the locations shown and attach 15 the Right Butterfly Arm (26) to the Right Butterfly Bracket (29) with an M10 x 75mm Bolt (82) and an M10 Locknut (77). Press a Bolt Cap (44) onto the end of the Bolt. Do not overtighten the Bolt; the Butterfly Arm must be able to pivot easily. 26 Repeat this step for the Left Butterfly Arm (25). 105 92 Grease 77 82 44 29 25 13