Weider Pro 4300 User Manual - Page 23

43. Attach the Seat (32) to the Seat Frame (8) with two M6 x 16mm Screws (88), an M6 x 32mm 43 Screw (89), and an M6 Washer (114). Insert the Seat Frame (8) into the Frame (9). Tighten the Seat Adjustment Knob (52) into the Frame and the Seat Frame. Make sure that the Adjustment Knob passes through one of the holes in the Seat Frame. 32 114 8 89 88 9 52 44. Insert a Pad Tube (13) into the indicated hole in the Front Leg (10). Slide a Foam Pad (36) onto each end of the Pad Tube. Press a Pad Cap (37) into each Foam Pad (36). Repeat this step for the other Pad Tube (13) and the Leg Lever (12). Note: Lift the Leg Lever Cable (51) when inserting a Pad Tube through the hole in the bottom of the Leg Lever. 44 37 36 12 51 13 10 13 36 37 45. Attach the Butterfly Cover (30) to the Butterfly 45 Bracket (5) with four M4 x 12mm Self-tapping Screws (102). 102 30 5 102 23