Weider Pro 4300 User Manual - Page 16

22. Wrap the Butterfly Cable (50) over a V-pulley (47). Attach the V-pulley, a Long Cable Trap (57), 22 an M10 Washer (80), and two Guards (54) to the 54 Upright (2) with an M10 x 60mm Bolt (79) and an 79 57 M10 Locknut (77). 50 47 80 54 2 77 23. Grease an M8 x 22mm Shoulder Bolt (90). Attach the Butterfly Cable (50) to the Right Butterfly Arm 23 (29) with the Shoulder Bolt and an M8 Locknut (78). Make sure that the flat edge of the Cable is against the Butterfly Arm. Grease 90 50 78 29 24. Identify the Lat Cable (49). Route the Cable up through the Top Frame (4) and over a 90mm Pulley (48). Attach the Pulley inside the Top Frame with an M10 x 80mm Bolt (84), two M10 Washers (80), two 19mm Spacers (67), and an M10 Locknut (77). Flat Edge 24 48 84 80 67 4 67 80 49 77 16