Weider Pro 9300 English Manual - Page 11
Cable Assembly, Arm Assembly - diagram
View all Weider Pro 9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ARM ASSEMBLY 17. Press a 1 3/4" Square Inner Cap (48) into the 17 lower end of the Left Fly Arm (6). Wet the lower end of the Left Fly Arm with soapy water. Slide a 10" Pad (22) onto the Left Arm. Repeat this step with the Right Fly Arm (5). 5 6 48 CABLE ASSEMBLY 22 18. Locate and open the parts bags labeled 18 "CABLE ASSEMBLY" and "PULLEYS." During steps 19 through 45, refer to the CABLE DIAGRAMS on pages 25 and 26 of this manual to verify proper cable routing. Before beginning this section, fully unwind the five Cables and identify the Cables by comparing the lengths and the ends. The approximate length of each Cable, in inches, is listed after the key number in the drawing. IMPORTANT: While assembling the cables, do not over tighten the bolts and nuts attaching the pulleys. The pulleys must be able to turn freely. 19. Identify the Butterfly Cable (88)-this is the 19 second shortest Cable. Attach one end of the Butterfly Cable to the the bracket on the Right Fly Arm (5) with a 5/16" x 1" Shoulder Bolt (51) and a 5/16" Nylon Nylon Locknut (40). 22 86-71 1/2" 88-82 3/16" 84-99 5/8" 85-110" 87-212 1/2" 51 88 5 40 11