Weider Pro 9835 English Manual - Page 15

Nylon Jam Nut 43.

Get Weider Pro 9835 PDF manuals and user guides View all Weider Pro 9835 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

30. Route the Press Cable (88) over the indicated 3 1/2Ó 30 Pulley (82) attached to the Pulley Plates (31). The Cable must be routed from the direction shown. Refer to the inset drawing. Make sure the Cable is between the Cable Trap (80) and the Pulley. Make 88 sure the Cable Trap is positioned to hold the Cable in place as shown in the inset drawing. Tighten the 3/8Ó x 2Ó Bolt (50) and the 3/8Ó Nylon Locknut (42, not shown). 31 50 82 80 88 31. Route the Press Cable (88) around a 3 1/2Ó Pulley (82). Attach the Pulley and a Cable Trap (80) to the 31 Leg Press Upright (4) with a 3/8Ó x 3 1/2Ó Bolt (66), a 3/8Ó Washer (38) and a 3/8Ó Nylon Jam Nut (43). Make sure the Cable Trap (80) is turned to hold the Cable in place. 88 82 66 80 32. Route the Press Cable (88) around a 3 1/2Ó Pulley (82). Attach the Pulley and a Cable Trap (80) to the Press Frame (12) with a 3/8Ó x 3Ó Bolt (94), a 3/8Ó Washer (38) and a 3/8Ó Nylon Jamnut (43). Make sure the Cable Trap (80) is turned to hold the Cable in place. 32 38 94 88 33. Wrap the Press Cable (88) around a ÒVÓ Pulley (81). 33 Attach the ÒVÓ Pulley to the upper bracket on the Leg Press Upright (4) with a 3/8Ó x 2Ó Bolt (50) and a 3/8Ó Nylon Jam Nut (43). 4 43 38 43 82 80 12 50 81 4 88 43 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
30.
Route the Press Cable (88) over the indicated 3 1/2±
Pulley (82) attached to the Pulley Plates (31).
The
Cable must be routed from the direction shown.
Refer to the inset drawing.
Make sure the Cable is
between the Cable Trap (80) and the Pulley. Make
sure the Cable Trap is positioned to hold the
Cable in place as shown in the inset drawing.
Tighten the 3/8± x 2± Bolt (50) and the 3/8± Nylon
Locknut (42, not shown).
31.
Route the Press Cable (88) around a 3 1/2± Pulley
(82). Attach the Pulley and a Cable Trap (80) to the
Leg Press Upright (4) with a 3/8± x 3 1/2± Bolt (66), a
3/8± Washer (38) and a 3/8± Nylon Jam Nut (43).
Make sure the Cable Trap (80) is turned to hold
the Cable in place.
32.
Route the Press Cable (88) around a 3 1/2± Pulley
(82). Attach the Pulley and a Cable Trap (80) to the
Press Frame (12) with a 3/8± x 3± Bolt (94), a 3/8±
Washer (38) and a 3/8± Nylon Jamnut (43).
Make sure the Cable Trap (80) is turned to hold
the Cable in place.
33.
Wrap the Press Cable (88) around a ²V± Pulley (81).
Attach the ²V± Pulley to the upper bracket on the Leg
Press Upright (4) with a 3/8± x 2± Bolt (50) and a 3/8±
Nylon Jam Nut (43).
15
31
32
33
30
31
82
50
88
80
88
82
88
88
94
38
12
82
80
43
88
81
4
50
43
38
43
4
80
66