Weslo Boomerang 203 Uk Manual - Page 6

Note: The Flat Washers and Nylon Locknuts may

Page 6 highlights

5. The Console (16) requires three 1.5V AA batteries; alkaline batteries are recommended. Insert three batteries into the Console. Make sure that the batteries are oriented as shown by the markings inside the Console. 5 Batteries 16 6. Hold the Console (16) near the Upright (13). Connect 6 the console wire to the Upper Wire (36). Next, connect the ground wire to the Upright with the Ground Screw (27). Insert the excess console wire and Upper Wire (36) down into the Upright (13). Next, move the Console (16) toward the Upright, at the same time inserting the excess ground wire up into the hole in the underside of the Console. Continue until all of the excess ground wire is inside of the Console. Attach the Console to the Upright with four M5 x 12mm Screws (49). Be careful to avoid pinching the wires. Console Wire 36 49 7. Attach the Seat (12) to the Seat Post (5) with three M8 7 Flat Washers (51) and three M8 Nylon Locknuts (10). Note: The Flat Washers and Nylon Locknuts may be preattached to the underside of the Seat. 16 27 Ground Wire Be careful to avoid pinching the wires. 13 12 5 51 10 51 10 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

6
7
6.
Hold the Console (16) near the Upright (13). Connect
the console wire to the Upper Wire (36). Next, connect
the ground wire to the Upright with the Ground Screw
(27).
Insert the excess console wire and Upper Wire (36)
down into the Upright (13). Next, move the Console
(16) toward the Upright, at the same time inserting the
excess ground wire up into the hole in the underside
of the Console. Continue until all of the excess ground
wire is inside of the Console. Attach the Console to
the Upright with four M5 x 12mm Screws (49).
Be
careful to avoid pinching the wires.
16
6
Be careful to
avoid pinching
the wires.
13
49
36
27
Ground
Wire
Console
Wire
5
5.
The Console (16) requires three 1.5V AA batteries;
alkaline batteries are recommended. Insert three bat-
teries into the Console.
Make sure that the batteries
are oriented as shown by the markings inside the
Console.
16
Batteries
7.
Attach the Seat (12) to the Seat Post (5) with three M8
Flat Washers (51) and three M8 Nylon Locknuts (10).
Note: The Flat Washers and Nylon Locknuts may be
preattached to the underside of the Seat.
51
12
51
10
10
5