Weslo Cadence 6.0 Treadmill Uk Manual - Page 8
Press the Book Rack 85 onto the Console Base 100
View all Weslo Cadence 6.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. See the inset drawings and identify the two Crossbar 4 Screws (69); be careful not to confuse the Crossbar Screws with the 3/4" Screws (90). Hold the Crossbar (75) on the small brackets on the Handrails (6, 7). Attach the Crossbar to the small brack- ets with the two Crossbar Screws (69). Do not tighten the Crossbar Screws yet. 7 Attach the end of the ground wire to the small hole in the side of the Right Handrail (6) with a Silver Ground Screw (87). Small Bracket 75 22 69 87 Small Bracket 6 69 69 5. Open part bag D. Place the Console Base (100) on the 5 Right Handrail (6) and the Left Handrail (not shown). Attach the Console Base with four 3/4" Screws (90) (only two Screws are shown). Do not tighten the Screws yet. Insert the Wire Harness (22) through the two indicated plastic ties on the Console Base (100). Next, insert the Wire Harness up through the opening beside the Wire Cover (86). Make sure that the Wire Cover is securely attached to the Console Base. See drawing 5a. Look at the top of the Console Base 90 (100). Insert the Wire Harness (22) through the plastic tie on top of the Console Base. 100 22 Ties 6 5a 22 90 86 Tie 100 6. Press the Book Rack (85) onto the Console Base (100) in 6 the location shown. 85 100 8