Weslo Cadence Dl15 English Manual - Page 7

Operation And Adjustment, Danger - belt change

Page 7 highlights

OPERATION AND ADJUSTMENT THE PERFORMANT LUBETM WALKING BELT equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power Your treadmill features a walking belt coated with cord into a surge protector, and plug the surge PERFORMANT LUBETM, a high-performance lubricant. protector into an appropriate outlet that is proper- IMPORTANT: Never apply silicone spray or other ly installed and grounded in accordance with all substances to the walking belt or the walking plat- local codes and ordinances. form. They will deteriorate the walking belt and cause excessive wear. This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- HOW TO PLUG IN THE POWER CORD trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be DANGER: Improper connection of the equipment-grounding conductor can used to connect the surge protector to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available. result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician. the plug provided with the product-if it will not fit the outlet, have a proper outlet installed by a qualified electrician. The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home's power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances being turned on or off. To decrease the possi- by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified electrician to determine if the outlet box cover is grounded before using an adapter. Important: The treadmill is not compatible with GFCI-equipped outlets. bility of your treadmill being damaged, always use a surge 1 protector (not includ- ed) with your tread- mill. Grounded Outlet Box Grounding Pin Treadmill Power Cord Surge protectors are Grounding Plug Grounding Plug sold at most hardware stores and department stores. Use only a ULlisted surge protector, Grounded Outlet Grounding Pin rated at 15 amps, with a 14-gauge cord of five feet or less in length. 2 Grounded Outlet Box This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is Lug Metal Screw Adapter Grounding Pin Grounding Plug Surge Protector 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

7
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE
TM
WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBE
TM
, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. They will deteriorate the walking belt and
cause excessive wear.
HOW TO PLUG IN THE POWER CORD
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home’s power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appli-
ances being turned on or off.
To decrease the possi-
bility of your treadmill
being damaged,
always use a surge
protector (not includ-
ed) with your tread-
mill.
Surge protectors are
sold at most hardware
stores and department
stores. Use only a UL-
listed surge protector,
rated at 15 amps, with
a 14-gauge cord of five
feet or less in length.
This product must be
grounded.
If it should
malfunction or break
down, grounding pro-
vides a path of least
resistance for electric
current to reduce the
risk of electric shock.
This product is
equipped with a cord having an equipment-grounding
conductor and a grounding plug.
Plug the power
cord into a surge protector, and plug the surge
protector into an appropriate outlet that is proper-
ly installed and grounded in accordance with all
local codes and ordinances.
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole recep-
tacle as shown in drawing 2 if a properly grounded
outlet is not available.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw.
Some 2-pole receptacle outlet
box covers are not grounded. Contact a qualified
electrician to determine if the outlet box cover is
grounded before using an adapter. Important: The
treadmill is not compatible with GFCI-equipped
outlets.
DANGER:
Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
1
2
Grounded Outlet Box
Grounded Outlet Box
Grounding Plug
Treadmill Power Cord
Grounding Plug
Grounding Plug
Grounding Pin
Surge Protector
Grounding Pin
Grounding Pin
Adapter
Lug
Metal Screw
Grounded Outlet