Weslo Cadence G 5.9i Treadmill English Manual - Page 10
Make sure that all parts are properly tightened before you use the treadmill., Do not pinch the wires. - won t start
View all Weslo Cadence G 5.9i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
5. Attach the console assembly (A) to the Uprights (73) and the Handrails (69) with five M4.2 x 5 A 19mm Screws (3). Do not pinch the wires. 73 3 69 3 3 69 6. Attach the Latch Assembly (42) to the left Upright (73) with two #10 x 1" Tek Screws (7); 6 start both Tek Screws, and then tighten them. 73 42 7 7. Make sure that all parts are properly tightened before you use the treadmill. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see page 20). Note: Extra parts may be included. 10
10
7.
Make sure that all parts are properly tightened before you use the treadmill.
To protect the floor or car-
pet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight.
Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see
page 20). Note: Extra parts may be included.
5.
Attach the console assembly (A) to the Uprights
(73) and the Handrails (69) with five M4.2 x
19mm Screws (3).
Do not pinch the wires.
5
6.
Attach the Latch Assembly (42) to the left
Upright (73) with two #10 x 1" Tek Screws (7);
start both Tek Screws, and then tighten them.
6
3
7
73
42
69
69
3
3
A
73