Weslo Cadence G 5.9i Treadmill English Manual - Page 18

how To Fold And Move The Treadmill, How To Lower The Treadmill For Use

Page 18 highlights

HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL Before folding the treadmill, remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow below. CAUTION: Do not hold the frame by the plastic foot rails. Bend your legs and keep your back straight. Raise the frame about halfway to the vertical position. HOW TO MOVE THE TREADMILL Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the latch plate is resting against the latch pin. Moving the treadmill may require two people. 1. Hold the frame and one of the handrails, and place one foot against a wheel. 1 1 Frame Frame Handrail 2. Hold the treadmill firmly with your right hand as shown. Pull the latch knob to the left and hold it. Raise the frame until the latch plate is past the latch pin. Then, slowly release the latch knob; make sure that the latch plate is resting against the latch pin. 2 Latch Knob Latch Plate Latch Pin To protect the floor or carpet, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85° F (30° C). Wheel 2.  Pull back on the handrail until the treadmill will roll on the wheels, and carefully move it to the desired location. CAUTION: Do not move the treadmill without tipping it back, do not pull on the frame, and do not move the treadmill over an uneven surface. 3. Place one foot against a wheel, and carefully lower the treadmill. HOW TO LOWER THE TREADMILL FOR USE 1. See drawing 2. Hold the upper end of the treadmill with your right hand as shown. Pull the latch knob to the left and hold it. Next, lower the frame until it is past the latch pin. Then, release the latch knob. 2. See drawing 1 at the left. Hold the metal frame firmly with both hands, and lower it to the floor. CAUTION: Do not hold the frame by the plastic foot rails, and do not drop the frame. Bend your legs and keep your back straight. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

18
HOW TO FOLD THE TREADMILL
Before folding the treadmill, remove the key and
unplug the power cord.
CAUTION: You must be
able to safely lift 45 lbs. (20 kg) to raise, lower, or
move the treadmill.
1.
Hold the metal frame firmly in the location shown
by the arrow below.
CAUTION: Do not hold the
frame by the plastic foot rails. Bend your legs
and keep your back straight.
Raise the frame
about halfway to the vertical position.
2.
Hold the treadmill firmly with your right hand as
shown. Pull the latch knob to the left and hold it.
Raise the frame until the latch plate is past the
latch pin. Then, slowly release the latch knob;
make sure that the latch plate is resting against
the latch pin.
To protect the floor or carpet, place a mat under the
treadmill. Keep the treadmill out of direct sunlight.
Do not leave the treadmill in the storage position in
temperatures above 85° F (30° C).
HOW TO MOVE THE TREADMILL
Before moving the treadmill, fold it as described at
the left.
CAUTION: Make sure that the latch plate is
resting against the latch pin. Moving the treadmill
may require two people.
1.
Hold the frame and one of the handrails, and place
one foot against a wheel.
2.
Pull back on the handrail until the treadmill will roll
on the wheels, and carefully move it to the desired
location.
CAUTION: Do not move the treadmill
without tipping it back, do not pull on the frame,
and do not move the treadmill over an uneven
surface.
3.
Place one foot against a wheel, and carefully lower
the treadmill.
HOW TO LOWER THE TREADMILL FOR USE
1.
See drawing 2.
Hold the upper end of the treadmill
with your right hand as shown. Pull the latch knob
to the left and hold it. Next, lower the frame until it
is past the latch pin. Then, release the latch knob.
2.
See drawing 1 at the left.
Hold the metal frame
firmly with both hands, and lower it to the floor.
CAUTION: Do not hold the frame by the plastic
foot rails, and do not drop the frame. Bend your
legs and keep your back straight.
HOW TO FOLD AND MOVE THE TREADMILL
Frame
1
1
Latch
Plate
Latch
Knob
Latch
Pin
Handrail
Frame
Wheel
2