Weslo Cadence G 5.9i Treadmill English Manual - Page 16

HOW TO CONNECT YOUR SMART DEVICE TO THE CONSOLE 1. Download and install the iFit app on your smart device. On your IOS® or AndroidTM smart device, open the App StoreSM or the Google PlayTM store, search for the free iFit app, and then install the app on your smart device. Make sure that the BLE option is enabled on your smart device. Then, open the iFit app and follow the instructions to set up an iFit account and customize settings. 2. Connect your smart device to the console. Follow the instructions in the iFit app to connect your smart device to the console. When a connection is established, the LED on the console will flash blue. Press the Bluetooth Smart button on the console to confirm the connection; the LED on the console will then turn solid blue. 3. Record and track your workout information. Follow the instructions in the iFit app to record and track your workout information. 4. Diconnect your smart device from the console if desired. To disconnect your smart device from the console, press and hold the Bluetooth Smart button on the console for 5 seconds; the LED on the console will turn off. Note: All BLUETOOTH connections between the console and other devices (including any smart devices, heart rate monitors, and so forth) will be disconnected. THE OPTIONAL CHEST HEART RATE MONITOR Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the best results is to maintain the proper heart rate during your workouts. The optional chest heart rate monitor will enable you to continuously monitor your heart rate while you exercise, helping you to reach your personal fitness goals. To purchase a chest heart rate monitor, please see the front cover of this manual. Note: The console is compatible with all BLUETOOTH Smart heart rate monitors. HOW TO CONNECT YOUR HEART RATE MONITOR TO THE CONSOLE The console is compatible with all BLUETOOTH Smart heart rate monitors. To connect your BLUETOOTH Smart heart rate monitor to the console, press the Bluetooth Smart button on the console. When a connection is established, the LED on the console will flash red twice. Note: This may take up to 15 seconds. Note: If there is more than one compatible heart rate monitor near the console, the console will connect to the heart rate monitor with the strongest signal. To disconnect your heart rate monitor from the console, press and hold the Bluetooth Smart button on the console for 5 seconds; after the LED lights up, release the button. Note: All BLUETOOTH connections between the console and other devices (including any smart devices, heart rate monitors, and so forth) will be disconnected. 16