Weslo Gym 3000 Uk Manual - Page 8

8. Set the two Weight Bumpers (19) on the indicated 8 plate on the Base (4). Align the holes in the Weight Bumpers with the holes in the plate. Stack nine Weights (25) on the Weight Bumpers (19). Each Weight must be turned so the pin groove is facing the Front Upright (42). The holes in the Weights must be aligned with the holes in the Weight Bumpers. CAUTION: Be careful to avoid tipping the stack of Weights (25) until step 9 is completed. 9 9. Press the Weight Tube Endcap (79) into the indi- cated end of the Weight Tube (80). Insert the Weight Tube (80) into the stack of Weights (25). Slide the tenth Weight (25) onto the upper end of the Weight Tube. The Weight Tube must be turned so the welded pin is in the pin groove in the Weight. Locate the lower ends of the Weight Guides (72) (there are holes near the upper ends). Insert the lower ends of the Weight Guides into the ten Weights (25). 10. Attach the upper ends of the Weight Guides (72) 10 to the Top Frame (67) with the 5/16" x 6" Bolt (74), the two 1/2" x 3/4" Bushings (73), and a 5/16" Nylon Locknut (3). 8 Pin Groove 25 19 42 19 4 Upper ends of Weight Guides have holes 72 25 80 73 Pin Groove Welded Pin 79 25 3 67 74 72