Weslo Gym 3000 Uk Manual - Page 9

11. Press two 1 3/4" Inner Caps (44) and two 1" Inner 11 Caps (104) into the Arm Frame (52). Lubricate the upper axle on the Arm Frame (52). Hold the axle between the two Arm Frame Bushings (68). Set the Arm Frame Bushings and the Arm Frame on the welded plate on the Top Frame (67). Place the Arm Frame Bracket (69) over the Arm Frame Bushings. Attach the Arm Frame Bracket to the Top Frame with four 1/4" x 3/4" Screws (18) and 1/4" Nylon Locknuts (7). Make sure that the bracket on the Arm Frame is facing away from the Front Upright (42). 18 69 68 Lubricate 67 104 104 44 7 42 44 52 Bracket 12. Press two 1 3/4" Inner Caps (44) into each of the Arms (46). Apply lubricant to the lower axles on the Arm Frame (52). Slide an Arm (46) onto one of the axles. Hold two 1" Retainers (54) and a 1" Round Cover Cap (55) against the lower end of the axle. The teeth on the Retainers must bend toward the Round Cover Cap (see inset drawing). Tap the Retainers and Round Cover Cap onto the axle. Attach the other Arm (46) to the Arm Frame (52) in the same manner. Make sure that both Arms (46) are behind the bracket on the Arm Frame (52). Insert the two 4 1/2" "L" Pins (60) down through the indicated holes in the Arm Frame (52) and the Arms (46). 12 52-Lubricate 54 44 44 55 46 44 Bracket 60 54 46 13. Wet both Arms (46) with soapy water. Slide a 7" Pad (45) onto each Arm. Press a 1" Round Inner Cap (49) into the indicated end of a 7" Handle (47). Wet the other end of the Handle with soapy water and slide a Handgrip (12) onto it. Insert the Handle into one of the Arms (46). Attach the Handle with a 5/16" x 2 1/4" Bolt (33), two 5/16" Flat Washers (8), a 1/2" x 3/8" Spacer (51) and a 5/16" Nylon Locknut (3). Attach a 7" Handle (47) to the other Arm (46) in the same manner. 13 46 45 47 44 52 54 55 8 3 46 47 12 49 8 45 51 33 9