Weslo Momentum R 5.2 Elliptical English Manual - Page 11

IMPORTANT: If the Console has

Page 11 highlights

10. Attach a set of Upper Body Covers A and B (88, 89) to the Right Upper Body Arm (15) and the 10 Right Upper Body Leg (80) with two M3 x 20mm Screws (79). Repeat this step on the other side of the elliptical. See assembly step 6. Tighten the M8 x 78mm Bolts (38) and the M8 x 16mm Screws (35). Then, press the Lower Upright Cover (83) into place. 89 79 83 15 88 80 35 11. The Console (1) can use four AA batteries (not included); alkaline batteries are recommended. 11 Do not use old and new batteries together or alkaline, standard, and rechargeable batter- ies together. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before you 1 insert batteries. Otherwise, you may dam- age the console displays or other electronic components. Remove the battery cover from the back of the Console (1), and insert batteries into the battery compartment. Make sure to orient the batteries as shown by the diagram inside the battery compartment. Then, reattach the battery cover. Battery Cover 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

11
10
88
15
89
79
80
10. Attach a set of Upper Body Covers A and B (88,
89) to the Right Upper Body Arm (15) and the
Right Upper Body Leg (80) with two M3 x 20mm
Screws (79).
Repeat this step on the other side of the
elliptical.
See assembly step 6.
Tighten the M8 x 78mm
Bolts (38) and the M8 x 16mm Screws (35).
Then, press the Lower Upright Cover (83) into
place.
83
35
1
Battery
Cover
11
11. The Console (1) can use four AA batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together.
IMPORTANT: If the Console has
been exposed to cold temperatures, allow
it to warm to room temperature before you
insert batteries. Otherwise, you may dam-
age the console displays or other electronic
components.
Remove the battery cover from the back of the
Console (1), and insert batteries into the battery
compartment.
Make sure to orient the bat-
teries as shown by the diagram inside the
battery compartment.
Then, reattach the bat-
tery cover.