Weslo Momentum R 5.2 Elliptical English Manual - Page 8

4. Attach the Right Pedal Arm Cover (85) to the Right Pedal Arm (75) with an M4 x 20mm Self- 4 tapping Screw (45). Repeat this step on the other side of the elliptical. 85 75 45 5. Orient the Upright (9) assembly and the Lower Upright Cover (83) as shown. Slide the Lower Upright Cover upward onto the Upright. Have a second person hold the Upright (9) and the Lower Upright Cover (83) near the Frame (54). Connect the Extension Wire (16) to the Main Wire (26). Tip: Avoid pinching the wires. Slide the Upright (9) onto the Frame (54). Attach the Upright (9) with two M8 x 78mm Bolts (38), two M8 Split Washers (8), two M8 Washers (71), and two M8 Locknuts (27). Make sure that the Locknuts are inside the hexagonal holes. Do not fully tighten the Bolts yet. Then, attach the Upright (9) with four M8 x 16mm Screws (35), four M8 Split Washers (8), and four M8 Washers (71). Do not fully tighten the Screws yet. Slide the Lower Upright Cover (83) downward to the Frame (54). Do not press the Lower Upright Cover into place yet. 5 Avoid pinching the wires 83 35 8 71 Hexagonal Holes 27 26 54 9 71 8 38 16 35 8