Weslo Pro 13.8e Elliptical Canadian English Manual - Page 13
How To Use The Manual Mode
View all Weslo Pro 13.8e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
HOW TO USE THE MANUAL MODE 1. Press any button on the console or begin pedaling to turn on the console. A few seconds after the console is turned on, the displays will light. A tone will then sound and the console will be ready for use. 2. Select the manual mode. If you have selected a workout, reselect the manual mode by pressing a Smart Workouts button once or twice until a track appears in the left display and the time is reset to zero. 3. Begin pedaling and change the resistance of the pedals as desired. As you pedal, change the resistance of the pedals by pressing the Resistance increase or decrease buttons. Note: After you press the Resistance, it will take a moment for the pedals to reach the selected resistance level. 4. Follow your progress with the displays. The left display-will show a track representing 640 revolutions (400 meters). As you exercise, indicators will appear in succession around the track until the entire track appears. The track will then disappear and the indicators will again begin to appear in succession The upper display- This display will show the approximate number of calories you have burned, the distance you have pedaled, and the elapsed time. The display will change modes every few seconds. Note: When a workout is selected, the display will show the time remaining in the workout instead of the elapsed time. The lower display- This display will show your pedaling pace, in revolutions per minute (RPM), and the resistance level of the pedals. The display will change modes every few seconds. The display will also show your heart rate when you use the handgrip pulse sensor. The console has three backlight options. The "On" option keeps the backlight on while the console is on. The "Auto" option keeps the backlight on only while you are pedaling. The "Off" option turns the backlight off. To select a backlight option, first press and hold down the Workout Start button for several seconds. Next, press the Resistance decrease button to select the desired backlight option. Then, press the Workout Start button to save your selection. 13