Weslo Pro 13.8e Elliptical Canadian English Manual - Page 8
to the Upper Wire Harness 86. Then, connect
View all Weslo Pro 13.8e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. The Console (5) can use four D batteries (not included); alkaline batteries are recommended. 5 IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic compo- nents. Remove the battery cover, insert the bat- teries into the battery compartment, and reat- tach the battery cover. Make sure to orient the batteries as shown by the diagram inside the battery compartment. To purchase an optional AC adapter, contact the store where you purchased this product or call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied AC adapter. Plug one end of the AC adapter into the jack on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. 6. While another person holds the Console (5) 6 near the Upright (2), connect the console wire to the Upper Wire Harness (86). Then, connect the console pulse wires to the Pulse Wires (113). Insert the excess wire downward into the Upright. Tip: Avoid pinching the wires. Attach the Console (5) to the Upright (2) with four M4 x 16mm Screws (66). Battery Cover Batteries 5 5 Console Wire 86 66 113 Pulse Wires 2 8