Weslo Pursuit 30 English Manual - Page 5

ASSEMBLY To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480. Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires an adjustable wrench screwdriver , and pliers . , a Phillips Use the drawings below to identify the small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. M4 x 15mm Screw (27)-4 M8 Locknut (10)-4 M8 Split Washer (42)-3 M8 Washer (47)-4 M4 x 25mm Self-tapping Screw (41)-3 M8 x 20mm Button Screw (34)-3 M8 x 55mm Button Screw (30)-4 M10 x 60mm Button Screw (33)-2 1. Orient the Rear Stabilizer (6) with the "Up" sticker 1 facing upward. Slide the Rear Stabilizer into the Frame (1). Attach the Rear Stabilizer with four M8 x 55mm Button Screws (30). 1 6 30 5