Weslo Pursuit 30 English Manual - Page 7
Screws 34 and three M8 Split Washers 42.
View all Weslo Pursuit 30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5. Turn the Seat Knob (9) counterclockwise and remove it from the Frame (1). Then, insert the Seat 5 Post (5) into the Frame. Adjust the Seat Post to the desired height and insert the Seat Knob through the indicated hole in the Frame into one of the adjust- ment holes in the Seat Post. Then, turn the Seat Knob clockwise until it is tight. Make sure that the Seat Knob is firmly engaged into one of the adjustment holes in the Seat Post. Adjustment Holes 5 1 Hole 9 6. While another person holds the Upright (13) near the Frame (1) as shown, connect the Upper Wire (52) to the Lower Wire (46). Then, insert the wires downward into the Frame. Tip: Avoid pinching the Wires (46, 52) during this step. Insert the Upright (13) into the Frame (1). Attach the Upright with three M8 x 20mm Button Screws (34) and three M8 Split Washers (42). 6 13 Avoid pinching the Wires (46, 52) during this step 34 42 52 46 42 34 1 7