Western Digital My DVR Expander USB Edition Quick Install Guide - Page 5
Using My DVR Expander With a DISH Network DVR
View all Western Digital My DVR Expander USB Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Using My DVR Expander With a DISH Network DVR The following sections describe how to use My DVR Expander with a DISH Network ViP622 DVR™ or ViP722 DVR™ satellite receiver. The DISH Network receiver model is listed on the System Information screen (accessed by MENU-6-1-3 on most receivers). Go to www.dishnetwork.com for an up-to-date list of compatible HD DVRs. Connecting My DVR Expander 1. Connect the AC adapter cord to the DVR Expander and electrical outlet as shown below. The power LED illuminates. CAUTION: Do not connect to the auxiliary power connector on the back of the DVR, as it is not an adequate power source for external drives. 2. Connect the USB cable to the DVR Expander and DVR. Power on the DVR if necessary. 3. A pop-up message displays asking if you want to reformat the drive. Select Yes. CAUTION: All previously stored content will be lost. Before you proceed, make sure to back up all files stored in My DVR Expander onto another storage device. 4. Call 888-241-2205 to activate the feature. You will pay a one-time activation fee, which covers all compatible receivers on your account. Power LED Step 2 USB Connection to DVR USB Connector Step 1 Power Connection Power Supply Connector Note: If the Multimedia menu displays No Device Attached under External USB Devices after connecting the DVR Expander, the receiver does not recognize the device. Disconnect any device connected to the other USB port, then reset the receiver with only the DVR Expander connected. My DVR Expander USB Edition | 4