Whirlpool GU3200XTXY Installation Instructions - Page 19
Secure Dishwasher in Cabinet, Opening
UPC - 883049201979
View all Whirlpool GU3200XTXY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Wiring configuration Power supply wire: white black ground wire Terminal box wire: white black ground connector If needed, see website for animated representation of this step. Visit www.whirlpool.com/electrical under FAQ tab. 4 Direct Wire-Secure cable in strain relief Secure Dishwasher in Cabinet Opening 1 Double-check dishwasher alignment in cabinet opening Tighten strain relief screws to secure cable. 5 Direct Wire-Reinstall terminal box cover Check that dishwasher is still level front-to-back and side-to-side in cabinet opening. 2 Remove lower dish rack and place towel Open dishwasher door, remove lower dish rack, and place towel over pump assembly and lower spray arm of dishwasher. This will prohibit screws from falling into pump area when securing dishwasher to countertop. 3 Secure dishwasher Place wires inside terminal box. Insert tabs on left side of cover. Make sure wires are tucked inside box. Close cover ensuring wires are not pinched. Use ¹⁄₄" nut driver and previously removed screw to secure cover. screw to side cabinet NOTE: Do not drop screws into bottom of dishwasher. Locate brackets on top of dishwasher and secure dishwasher to countertop with two, #10 x ¹⁄₂" Phillips-head screws (included). The dishwasher must be secured to keep it from shifting when door is opened. 19