Whirlpool RBD305PRS Use and Care Manual - Page 12

To Replace

Get Whirlpool RBD305PRS PDF manuals and user guides View all Whirlpool RBD305PRS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

OVEN RACKS AND ROASTING RACKS Cleaning Method: • Self-Cleaning cycle: See "Self-Cleaning Cycle" first. Remove racks or they will discolor and become harder to slide. If this happens, a light coating of vegetable oil applied to the rack guides will help them slide. • Steel-wool pad BROILER PAN AND GRID (on some models) Do not clean in the Self-Cleaning cycle. Cleaning Method: • Mildly abrasive cleanser: Scrub with wet scouring pad. • Solution of 1/2cup (125 mL) ammonia to 1 gal. (3.75 L) water: Soak for 20 minutes, then scrub with scouring or steel-wool pad. • Oven cleaner: Follow product label instructions. Porcelain enamel only, not chrome • Dishwasher For normal range use, it is not suggested to remove the oven door. However, if removal is necessary, make sure the oven is off and cool. Then, follow these instructions. The oven door is heavy. To Remove: 1. Open oven door all the way. 2. Flip up the hinge latch on each side. 3= Close the oven door as far as it will shut. 4. Lift the oven door while holding both sides. Continue to push the oven door closed and pull it away from the oven door frame. The oven lights are standard 15-watt appliance bulbs. They will come on when the oven door is opened. On double oven models with self-clean upper and lower ovens, all oven lights will come on when either door is opened. On double oven models with standard-clean lower ovens, the oven lights will not come on when the lower oven door is opened. The oven lights will not work during the Self-Cleaning cycle. When the oven door is closed, touch OVEN LIGHT to turn them on or off. To Replace: Before replacing, make sure the oven is off and cool. 1. Disconnect power. 2. Turn the glass bulb cover in the back of the oven counterclockwise to remove. To Replace: 1. Insert both hanger arms into the door. 3. Turn bulb counterclockwise to remove from socket. 4. Replace bulb and bulb cover by turning clockwise. 5. Reconnect power. 2= Open the oven door. You should hear a "click" as the door is set into place. 3. Move the hinge levers back to the locked position. Check that the door is free to open and close. If it is not, repeat the removal and installation procedures. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
OVEN
RACKS
AND
ROASTING
RACKS
Cleaning
Method:
•
Self-Cleaning
cycle:
See "Self-Cleaning
Cycle"
first.
Remove racks or they will
discolor
and become
harder to slide. If this happens,
a light
coating
of vegetable
oil applied
to the rack guides will help
them slide.
•
Steel-wool
pad
BROILER
PAN AND
GRID
(on some
models)
Do not clean in the Self-Cleaning
cycle.
Cleaning
Method:
•
Mildly abrasive
cleanser:
Scrub with
wet scouring
pad.
•
Solution
of 1/2cup (125 mL) ammonia
to 1 gal. (3.75 L) water:
Soak for 20 minutes, then scrub with scouring
or steel-wool
pad.
•
Oven cleaner:
Follow
product
label instructions.
Porcelain
enamel
only, not chrome
•
Dishwasher
For normal range use, it is not suggested
to remove the oven
door. However,
if removal is necessary,
make sure the oven is off
and cool. Then, follow these instructions.
The oven door
is heavy.
To Remove:
1.
Open oven door all the way.
2.
Flip up the hinge latch on each side.
3=
4.
Close the oven door as far as it will shut.
Lift the oven door while
holding
both sides.
Continue
to push the oven door closed
and pull it away from
the oven door frame.
The oven lights are standard
15-watt
appliance
bulbs. They will
come on when the oven door is opened.
On double
oven models
with self-clean
upper and lower
ovens, all oven lights will come
on when
either door is opened.
On double
oven models
with
standard-clean
lower ovens, the oven lights will not come on
when the lower oven door is opened.
The oven lights will not
work during the Self-Cleaning
cycle. When the oven door is
closed, touch
OVEN LIGHT to turn them on or off.
To Replace:
Before replacing,
make sure the oven is off and cool.
1.
Disconnect
power.
2.
Turn the glass bulb cover in the back of the oven
counterclockwise
to remove.
To Replace:
1.
Insert both hanger arms into the door.
3.
Turn bulb counterclockwise
to remove from socket.
4.
Replace bulb
and bulb cover by turning
clockwise.
5.
Reconnect
power.
2=
3.
Open the oven door.
You should
hear a "click"
as the door is set into place.
Move the hinge levers back to the locked
position.
Check
that the door is free to open and close.
If it is not, repeat the
removal and installation
procedures.
12