Whirlpool SC8720EDB Installation Instructions - Page 9
Cooktop removal - vent
UPC - 050946528700
View all Whirlpool SC8720EDB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Cooktop removal If removing the cooktop is necessary for cleaning or maintenance: 1. Shut off gas supply. 2. Disconnect gas and electrical supplies. 3. Disconnect vent system from unit inside cabinet. 4. Lift cooktop out of countertop to complete cleaning or maintenance. After cleaning and maintenance: 1. Reinstall cooktop in cutout. 2. Check that front edge of cooktop is parallel to front edge of countertop. 3. Connect gas and electrical supplies. 4. Connect vent system. If cooktop does not operate: ࠜ Check that circuit breaker is not tripped or the house fuse blown. ࠜ Check that the power supply cord is plugged into the wall receptacle. ࠜ Check that the gas supply valves are turned to the "ON" position. ࠜ See Use and Care Guide for troubleshooting list. If you need assistance: Check your Use and Care Guide for a toll-free number to call, or call the dealer from whom you purchased this appliance. The dealer is listed in the Yellow Pages of your phone directory under "Appliances - Household - Major - Service and Repair." When you call, you will need the cooktop model number and serial number. Both numbers can be found on the model/serial rating plate located on the bottom of the burner box. Part No. 8101P350-60/8284676 © 2000 Whirlpool Corporation Benton Harbor, Michigan 49022 Printed in U.S.A.