Whirlpool WET3300SQ User Instructions - Page 2

INSTALLATION INSTRUCTIONS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools needed: ■ #2 Phillips and flat-blade screwdriver ■ Adjustable wrench that opens to 1" (2.5 cm) or open-end wrench (for adjusting washer/dryer feet) ■ ¼" nut driver or socket wrench (recommended) ■ Wire stripper (for U.S. only, direct wire installations) ■ Caulking gun and compound (for installing new exhaust vent) ■ Level ■ Wood block (for leveling) ■ Ruler or measuring tape ■ Knife ■ Vent clamps ■ Pliers ■ Scissors ■ Tin snips (for new vent installations) Parts supplied: Remove parts package from the washer basket. Check that all parts were included. A B C Alternate Parts Your installation may require additional parts. For information on ordering, please refer to the toll free phone numbers on the front page of the Washer/Dryer User Instructions. If You Have You Will Need to Buy Laundry tub or standpipe taller than 96" (2.4 m) Sump pump system (if not already available) 1" (2.5 cm) diameter standpipe 2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe adapter, Part Number 3363920 Overhead sewer Standard 20 gal. (76 L) 34" (86.4 cm) tall drain tub or utility sink and sump pump (available from local plumbing suppliers) Floor drain Siphon break, Part Number 285320, additional drain hose, Part Number 285702 and connector kit, Part Number 285442 Drain hose too short Drain hose, Part Number 285664 and connector kit, Part Number 285442 Lint clogged drain Drain protector, Part Number 367031 Water faucets beyond reach of fill hoses 2 longer water fill hoses: 6 ft (1.8 m) Part Number 76314, 10 ft (3.0 m) Part Number 350008 D E A. Water inlet hoses (2) B. Inlet hose flat washers (4) C. Front leveling feet with nuts (2) F D. Shipping strap (not in parts bag. See "Remove Shipping Strap.") E. Drain hose F. Silver, double wire hose clamp Parts needed: Check local codes, electrical supply and venting, and read "Electrical Requirements" and "Venting Requirements" before purchasing parts. Mobile home installations require metal exhaust system hardware available for purchase from the dealer from whom you purchased your washer/dryer. For further information, please reference the "Assistance or Service" section of the Washer/Dryer User Instructions. 2