Whirlpool WFC8090GX Installation Instructions - Page 13

10. Select options, if desired† 11. Use Tools button to change other settings, if desired From the home screen, touch the Options icon (at upper right of screen) and the Options screen will show Soil Level, Extra Rinses, Pre-Soak, Tumble Fresh,™ and Wrinkle Shield™ selections. Previously selected "What to Wash" and "How to Wash" options will be shown on the screen. Touch the screen for each option to change its setting. Soil Level Option The Soil Level option allows you to select a Light, Normal, or Heavy soil level setting. The recommended soil level is preset for each cycle. Some preset soil levels can be changed. For heavily soiled and sturdy fabrics, select the Heavy soil level setting. For lightly soiled and delicate fabrics, select the Light soil level setting. Lower soil level settings will help reduce tangling and wrinkling. Extra Rinses Option The Extra Rinses option provides one or more additional rinses to the selected cycle. The extra rinses can be canceled at any time by touching the "X" on the touch screen to the right of the estimated time remaining. Pre-Soak Option The Pre-Soak option can be set either on or off. Pre-Soak may be ended at any time by touching the "X" on the touch screen to the right of the estimated time remaining. Tumble Fresh™ Option The Tumble Fresh™ option will periodically tumble the load after the end of the cycle for up to 12 hours. Touch TUMBLE FRESH to activate this option. This option is not available when a drying mode is selected. Tumble Fresh™ may be ended at any time by touching the "X" on the touch screen to the right of the estimated time remaining. Wrinkle Shield™ Option The Wrinkle Shield™ option is only available when a drying mode is selected, and will periodically tumble the load after the end of the cycle for up to 12 hours. Wrinkle Shield™ may be ended at any time by touching the "X" on the touch screen to the right of the estimated time remaining. †Not all options and settings are available with all programs/cycles. See "Cycle Guides" for available options and settings. The Tools button gives access to many other settings, utility cycles, preferences, and information. Touch the TOOLS button to access the Tools screen, which contains the following (you will need to scroll down with your finger to access all of the selections). Load & Go™ Dispenser 1 Press this icon to access: Load & Go™ Status Dispenser 1 and choose between: n Active n Disabled (1 Cycle) n Off (Permanently) Detergent Concentration Dispenser 1 and choose between: n 2X n 4X n 6X n 8X Load & Go™ Dispenser 2 Press this icon to access: Load & Go™ Status Dispenser 2 and choose between: n Active n Disabled (1 Cycle) n Off (Permanently) Load & Go™ Content Dispenser 2 and choose between: n Softener n Detergent Once set at Detergent: Set Concentration Dispenser 2 and choose between: n 2X n 4X n 6X n 8X Control Lock Press this icon to lock the controls. Swipe up to unlock. Mute Press this icon to mute or unmute sounds. Utility Cycles Press this icon to access the following utility cycles: Spin, Drain, Rinse & Spin, and Clean Washer with affresh® cycle. Touch the utility cycle you wish to use and follow the screen prompts. Preferences Press to access Times and Dates, Sound Volume, Display Settings, and Regional. Follow the screen prompts. WiFi Press to access Connect to Network, SAID (Smart Appliance ID) Codes, Mac Address, and WiFi. Follow the screen prompts. Info Press to access Service & Support, Store Demo Mode, Restore Factory, WiFi Terms and Conditions, and Software Terms and Conditions. Follow the screen prompts. 13